Truck Tractor (2636S) / (2642S) 6x4
Truck tractor 6 x 4 “BEI BEN “ Compelling rugged Reliability .. Economic .. Efficiency .. These elements :
The Truck Tractor BEI BEN in order to compete at the top it depends on the Truck Tractor 4 × 6 is among the options where the key has the potential of allowing customers to achieve huge economic returns.
The Truck Tractor BEI BEN is processed by a Diesel engine model WD615.46 of 6 cylinder in line turbo charge, intercooler.
More Info - Truck Tractor (2636S) / (2642S) 6x4
Truck tractor 6 x 4 “BEI BEN “ Compelling rugged Reliability .. Economic .. Efficiency .. These elements :
The Truck Tractor BEI BEN in order to compete at the top it depends on the Truck Tractor 4 × 6 is among the options where the key has the potential of allowing customers to achieve huge economic returns.
The Truck Tractor BEI BEN is processed by a Diesel engine model WD615.46 of 6 cylinder in line turbo charge, intercooler.
The maximum ability of the Truck Tractor BEI BEN Engine is dated HP/RPM 360/2200, Torque N.M/RPM (1600-1400)/1460 and is compatible with the requirements of the European Environment Euro 2.
The Gear Box in the Truck Tractor type is Eaton (Fuller), model 12JS200T with 12 fronts and 2 rears; also we have another model the 9JS180 of 9 fronts and 1 rear.
The Cabin of the Truck Tractor equipped with long cab with double bed and driver suspend seat and the process of steering type is power steering model ZF8098.
The axles in the Truck Tractor are non-driving steering axle at front and Tandom, double reduction with differential lock at rear.
The Truck Tractor depends on the suspension system at the front and rear heavy duty leaf spring with shock Absorbers and frond stabilizer bar.
| NORTH BENZ NG80 6X4 Tractor Truck | |
| Model | ND42501B34J7 |
| Driver’s cab | Long High cabin, two sleepers with A/C |
| Engine | Maker: WEICHAI |
| Diesel 4 stroke direct injection diesel engine, 6 cylinder in-line with water cooling,turbo-charging & inter cooling | |
| Engine model: WP12.420E32
EURO II/EUROIII emission standard |
|
| Maximum output:420hp@2200rpm | |
| Number of cylinder:6 | |
| Displacement: 11.926L | |
| Clutch | Single-plate dry coil-spring clutch,diameter 420mm, hydraulically operating with air assistance |
| Transmission | Fuller 12JS200T transmission. |
| Front Axle | Benz 7.5tons drum brake |
| Rear Axle | Benz type double reduction drive axle, ratio=5.2 |
| Steering | TAS85 |
| Wheel & Types | Rims:8.5-20 |
| Tyre:12.00R20 | |
| Optional: 12R22.5//315/80R22.5 | |
| Radial tire is optional | |
| Electrics | Operating voltage: 24V,negative grounded |
| Dimensions in mm | Wheel base : 3450+1450 |
| Overall size: 7050x2500x3840 | |
| Weight in kg | Kerb. mass: 8800 kg |
| Total mass: 40000kg | |
| Performance | Maximum driving speed(km/h) 90 |
| Fifth wheel | 16070kg |
A dump truck is a truck used for transporting loose material (such as sand , gravel , or dirt ) for construction . A typical dump truck is equipped with a hydraulically operated open-box bed hinged at the rear, the front of which can be lifted up to allow the contents to be deposited on the ground behind the truck at the site of delivery. They are also known as tipper trucks.
A standard dump truck is a truck chassis with a dump body mounted to the frame. The bed is raised by a hydraulic ram mounted under the front of the dumper body between the frames, and the back of the bed is hinged at the back to the truck. The tailgate can be configured to swing on hinges or it can be configured in the “High Lift Tailgate” format wherein pneumatic rams lift the gate open and up above the dump body.
Common configurations for a standard dump truck include the six wheeler which has one powered rear axle, the ten wheeler with two powered rear axles, the tri-axle with one lift axle and two powered axles, and the quad with two lift axles and two powered axles.. The largest of the standard dump trucks is commonly called a “centipede” and has seven axles. The rear two axles are powered, the front axle is the steering axle, and the remaining four are lift axles. The intermediate axles are present to support the weigh over the length of the chassis and sometimes to provide additional braking power. The short wheelbase of a standard dump truck makes it more maneuverable than the higher capacity semi-trailer dump trucks.
An articulated dump truck, or “Yuke” in the construction world, has a hinge between the cab and the dump box, but is distinct from semi trailer trucks in that the cab is a permanent fixture, not a separable vehicle. Steering is accomplished via hydraulic rams that pivot the entire cab, rather than rack and pinion steering on the front axle. This vehicle is highly adaptable to rough terrain. In line with its use in rough terrain, longer distances and overly flat surfaces tend to cause driveline troubles, and failures. Articulated trucks are often referred to as the modern scraper, in the sense that they carry a much higher maintenance burden than most trucks.
Yes. We offer a guarantee to 60,000 Km or 1 year (whichever is reached first).
Yes, it is possible. It is installed on the opposite side of the standard tank.
Yes. It can be added next to the batteries.
Our dump trucks are imported fully built and finished. The dumper is built and fitted on the truck in the manufacturer’s factory. We receive our dump truck as a turn-key product.
It is linked to the main engine.
Yes. We offer 24 hour service to our customers across most of the country. A maintenance car with an Engineer and spare parts are available for our customers all the time.
The dumper reaches 45 degrees and tips to the back only.
The Jack is 3.5 inches.
Yes. A/C is a standard option. Bed is also installed in our tractor heads
Yes. It can be added next to the batteries.
Ready to take on any job, any time.
Just give us a call.
Send Us a Quick Message
How to benefit from this offer:
To make most of this offer, get in touch with us through any of the following:
Fill the enquiry form given below and our customer service team will get back in touch with you.