NORTH BENZ(Beiben) 6X4 25t Tipper Dumper Truck
North Benz Military Use Beiben 6X4 25t Tipper Truck Dump Truck
1 Near 20 years Wholesaler experience in truck and truck parts field
2 Specialization: Accurately meet your requirement, Experienced engineers serving for you
3 Good quality: Original products & OEM services, with many Certifications.
4 Great variety and wide range: Your “One-shop purchasing service”
More Info - NORTH BENZ(Beiben) 6X4 25t Tipper Dumper Truck
SPECIFICATION: Beiben Dump Truck
Cabin NG80 Long cabin with A/C, one bedMajor color of cab: Ice white lacquer+ color bar, date red lacquer, Orange
Vehicle Main Dimensions L*W*H(mm) 8250x2500x3690
Wheel base(mm) 3800+1450mm
Weightin KGS Tare Weight(kg) 12200kg
Total mass (kg) 40000kg
Driving Speed(km/h) 90
Engine Brand Weichai WP10.340
Max. output 340hp@2200rpm
Max torque 1250NM@1200-1600rpm
Gear box Fast 9JS159A 9 speeds 1 reverse
|NORTH BENZ(Beiben) 6X4 25t Tipper Dumper Truck|
|Driving type||LHD (Right Hand Drive is optional）|
|Driver’s cab||Long cabin, with one sleeper|
|Diesel 4 stroke direct injection diesel engine, 6 cylinder in-line with water cooling, turbo-charging & inter cooling|
|Engine model: WP10.380E32
EURO II/EUROIII emission standard
|Maximum output: 380HP @2200 rpm|
|Number of cylinder:6|
|Clutch||430mm, hydraulically operating with air assistance|
|Transmission||FULLER Brand transmission.|
|Front Axle||Benz front axle 7.5 tons|
|Rear Axle||Benz double reduction drive axle|
|Option: ZF8098, hydraulic steering with power assistance|
|Wheel & Types||Tires: 12.00R20|
|Radial tire and tubeless tire is optional|
|Electrics||Operating voltage: 24V, negative grounded|
|Dimensions in mm||Wheel base: 3800+1450|
|Overall size: 8260x2500x3450|
|Weight in kg||Kerb weight 12220|
|Permissible trailing capacity 25000|
|Performance||Maximum driving speed(km/h) 85|
|Body mm||5400x2300x1500 Floor 8 side&back4, middle lifting type|
|The manufacture reserves the right of technical alteration/
change for better improvement prior notice
A dump truck is a truck used for transporting loose material (such as sand , gravel , or dirt ) for construction . A typical dump truck is equipped with a hydraulically operated open-box bed hinged at the rear, the front of which can be lifted up to allow the contents to be deposited on the ground behind the truck at the site of delivery. They are also known as tipper trucks.
A standard dump truck is a truck chassis with a dump body mounted to the frame. The bed is raised by a hydraulic ram mounted under the front of the dumper body between the frames, and the back of the bed is hinged at the back to the truck. The tailgate can be configured to swing on hinges or it can be configured in the “High Lift Tailgate” format wherein pneumatic rams lift the gate open and up above the dump body.
Common configurations for a standard dump truck include the six wheeler which has one powered rear axle, the ten wheeler with two powered rear axles, the tri-axle with one lift axle and two powered axles, and the quad with two lift axles and two powered axles.. The largest of the standard dump trucks is commonly called a “centipede” and has seven axles. The rear two axles are powered, the front axle is the steering axle, and the remaining four are lift axles. The intermediate axles are present to support the weigh over the length of the chassis and sometimes to provide additional braking power. The short wheelbase of a standard dump truck makes it more maneuverable than the higher capacity semi-trailer dump trucks.
An articulated dump truck, or “Yuke” in the construction world, has a hinge between the cab and the dump box, but is distinct from semi trailer trucks in that the cab is a permanent fixture, not a separable vehicle. Steering is accomplished via hydraulic rams that pivot the entire cab, rather than rack and pinion steering on the front axle. This vehicle is highly adaptable to rough terrain. In line with its use in rough terrain, longer distances and overly flat surfaces tend to cause driveline troubles, and failures. Articulated trucks are often referred to as the modern scraper, in the sense that they carry a much higher maintenance burden than most trucks.
Yes. We offer a guarantee to 60,000 Km or 1 year (whichever is reached first).
Yes, it is possible. It is installed on the opposite side of the standard tank.
Yes. It can be added next to the batteries.
Our dump trucks are imported fully built and finished. The dumper is built and fitted on the truck in the manufacturer’s factory. We receive our dump truck as a turn-key product.
It is linked to the main engine.
Yes. We offer 24 hour service to our customers across most of the country. A maintenance car with an Engineer and spare parts are available for our customers all the time.
The dumper reaches 45 degrees and tips to the back only.
The Jack is 3.5 inches.
Yes. A/C is a standard option. Bed is also installed in our tractor heads
Yes. It can be added next to the batteries.
Ready to take on any job, any time.
Just give us a call.
Send Us a Quick Message
How to benefit from this offer:
To make most of this offer, get in touch with us through any of the following:
Fill the enquiry form given below and our customer service team will get back in touch with you.